UD3 Model M340C: Attaching USB Device to Connectivity Bar

The connectivity bar (part number: 62-5-UD3-POF4/BL) is an optional accessory for IGEL IZ3 devices and UD3 model M340C with a new case design. With the connectivity bar you can add:

• two serial ports;

• a hidden / anti-theft USB port, i.e. for a Wi-Fi USB stick or USB mass storage.

The following description shows you how to open the cradle foot for connecting the USB device and how to mount it on the case of the IGEL device.

Components

The optional IGEL connectivity bar consists of the cradle foot and the bottom case.

Opening the Connectivity Bar

→ Turn the cradle upside down and unscrew the bottom case.

→ Push the bottom case away from the cradle in the direction of the arrow as shown in the figure below.

Connecting the USB Device

→ Connect the USB device to the USB port as shown in the figure below.

Reassembling and Mounting the Connectivity Bar

1. Screw the bottom case onto the cradle again.
   

2. Mount the cradle with the attachment screw onto the case of the IGEL device.

   

3. Attach the foot stand with two screws to the bottom of the cradle.