Skip to main content
Skip table of contents

Device Support

Menu path: Setup > Sessions > RDP > RDP Global > Mapping > Device Support

In this area, you can enable virtual RDP channels for communicating with various devices connected to the device.

The devices supported are listed in the IGEL Third Party Hardware Database.

  • Enable plugin support

    ☑ Communication between connected devices and the relevant server applications is enabled. The individual channels must also be enabled.

    ☐ Communication between connected devices and server applications is not enabled. (Default)

When using DriveLock, ensure that the use of USB devices is not universally restricted; see Devices > USB Access Control.

  • DriveLock channel: The virtual DriveLock channel is implemented on the device. The channel must also be installed on the RDP server.
    DriveLock can read hardware data from local USB devices and transfer these data to the server with the help of the virtual RDP channel extension. From IGEL Linux Version 10.03.500 this is also possible with SATA devices. When using whitelists, rules based on the hardware properties of the connected drive (e.g. manufacturer details, model and serial number) are taken into account.

    Important information regarding DriveLock can be found in the Using DriveLock with IGEL Devices FAQ.

    ☑ A virtual channel for DriveLock is enabled.

    ☐ No virtual channel for DriveLock is enabled. (Default)

  • Diktamen channel for dictation

    ☑ A virtual channel for Diktamen is enabled.

    ☐ No virtual channel for Diktamen is enabled. (Default)

  • deviceTRUST channel

    ☑ A virtual channel for deviceTRUST is enabled..

    ☐ No virtual channel for deviceTRUST is enabled. (Default)

  • Grundig MMC channel for dictation with Grundig devices

    ☑ A virtual channel for communication with Grundig devices is enabled.

    ☐ No virtual channel for communication with Grundig devices is enabled. (Default)

  • Olympus channel for dictation
    ☑ A virtual channel for communication with Olympus dictation devices is enabled.
    ☐ No virtual channel for communication with Olympus dictation devices is enabled. (Default)

  • Philips speech channel for dictation

    ☑ A virtual channel for communication with Philips dictation devices is enabled.

    ☐ No virtual channel for communication with Philips dictation devices is enabled. (Default)

  • DPM server drive: Via this drive, the Philips PocketMemo dictation device makes the voice recordings available to the server. (Default: P)

The dictation device is automatically assigned to the selected drive letter. Ensure that no other Hotplug storage device is assigned to this drive letter. Further information can be found under Hotplug storage device and Drive mapping.

  • SpeechAir server drive: Via this drive, the Philips SpeechAir dictation device makes the voice recordings available to the server (default: S)

The dictation device is automatically assigned to the selected drive letter. Ensure that no other Hotplug storage device is assigned to this drive letter. Further information can be found under Hotplug storage device and Drive mapping.

  • Lakeside SysTrack channel
    ☑ The Lakeside SysTrack channel is enabled.

    ☐ The Lakeside SysTrack  channel is not enabled. (Default)

  • Enable smartcard

    ☑ The device’s smartcard reader will appear within the RDP session. Applications can access the reader and the smartcards it contains. (Default)

    ☐ The device’s smartcard reader will not appear within the RDP session.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.