Skip to main content
Skip table of contents

Known Issues 10.04.100

Citrix Receiver 13

  • On devices with AMD/Radeon graphics chipsets and activated DRI3 X driver option the hardware accelerated Citrix H.264 decoder plugin can hang. To solve this issue deactivation of DRI3 option is necessary (default setting).

    More

    Parameter

    Use DRI3

    Registry

    x.drivers.use_dri3

    Value

    enabled / disabled

    Parameter

    Force usage of DRI3

    Registry

    x.drivers.amdgpu.force_dri3

    x.drivers.ati.force_dri3

    Value

    enabled / disabled

  • Citrix StoreFront login with Gemalto smartcard middleware does not detect smartcard correctly when the card is inserted after start of login. As a workaround, insert the smartcard before starting StoreFront login.
  • No smooth playback over Nuance channel if the dictation device isn't attached.

VMware Horizon

  • External drives mounted already before connection do not appear in the remote desktop.
    Workaround: mapping the directory /media as a drive on desktop.
    Then the external devices will show up inside the media drive.
  • Client drive mapping and USB redirection for storage devices should not be enabled both at the same time.
    • On the one hand, when using USB redirection for storage devices: The USB on-insertion feature is only working when the client drive mapping is switched off. In the IGEL Setup client drive mapping can be found in: Sessions > Horizon Client > Horizon Client Global > Drive Mapping > Enable Drive Mapping. It is also recommended to disable local Storage Hotplug: On page Devices > Storage Devices > Storage Hotplug, put number of storage hotplug devices to 0.
    • On the other hand, when using drive mapping instead, it is recommended to either switch off USB redirection entirely or at least deny storage devices by adding a filter to the USB class rules. Furthermore, Horizon Client relies on the OS to mount the storage devices itself. Change on the following setup page is required: Devices > Storage Devices > Storage Hotplug.
      Activate Enable dynamic drive mapping and set Number of storage hotplug devices to at least 1.

Firefox

  • Because the support for the gstreamer framework was dropped by recent Firefox versions, support for H264 decoding in the browser is not possible anymore due to licensing restrictions.

OpenConnect VPN

  • VPNs which need the OpenConnect client cannot be used for firmware updates.

Evidian

  • Active Directory users with a password containing special characters may have problems to authenticate with the configured session.
    Known special characters which result in errors are:
    ` (grave accent, ASCII code 96)
    ยด (acute accent, ASCII code 239)
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.