Creating a Profile

1. Create a profile that is based on the appropriate IGEL OS 10 firmware version (10.05.700 or higher). Find a suitable name for the profile, e.g. "Firmware upgrade to IGEL OS 11".
   

   

2. In the profile's configuration dialog, go to System > Update > Firmware Update and change the settings according to your environment:

   • If the UMS and the devices are in one and the same network, and no IGEL Cloud Gateway (ICG) is used:

     • Select "HTTPS" as Protocol.

     • Activate Automatic Update Check on Boot.

     • Ensure that Automatic Update Check on Shutdown is deactivated. Otherwise, the device will shut down when the update is finished.

   

   
   

   • If IGEL Cloud Gateway (ICG) is used:

     • Select "FTP" as Protocol.

     • Activate Automatic Update Check on Boot.

     • Ensure that Automatic Update Check on Shutdown is deactivated. Otherwise, the device will shut down when the update is finished.

   

3. Go to System > Update > OS 11 Upgrade and change the following settings according to your successful upgrade test:

   • Activate Upgrade to OS 11.

   • Set Upgrade to OS 11 even if PowerTerm is enabled according to your needs.

   • Set Upgrade to OS 11 even if a previous upgrade attempt failed according to your needs.

   • Set Require an Enterprise Management Pack license to upgrade to OS 11 according to your needs.

   • Ensure that the Timeout waiting for OS 11 license to start automatic upgrade is set to 10 Minutes.

   

   
   
   

4. Go to System > Remote Management and change the settings as follows:

   • Deactivate Display 'Apply changes' dialog on boot.

   • Set Default action on boot to Apply changed configuration immediately.

   

5. Click Save.

When the profile es created, continue with Deploying the Licenses for IGEL OS 11.