Menu path: UMS Administration > Global Configuration > Server Network Settings
Online Check Parameters
Disable online check
The online check is disabled on the UMS Console.
Timeout (ms): Specifies how long the system will wait for a response to an online status query message. The UMS Console attempts to contact all thin clients that are currently visible in the console. Each thin client in this area must respond to the status query in the specified time or will otherwise be flagged as “offline”. (Default: 100).
Scheduled jobs never expire
No time limit for scheduled jobs.
Expiration time for scheduled jobs: Time in minutes after which a scheduled job will expire. (Default: 40)
Timeout (ms): Specifies how long in milliseconds the UMS will wait for a response to scan packages. (Default: 6000)
Broadcast IP: Broadcast address that is used for scan packages. It is only used for scanning the local network. If IP ranges are used, the UDP packets will be sent to each client within the IP range. (Default: 255.255.255.255)
Specify scan reply port (UDP): Allows you to specify a set port via which the thin clients respond if the UMS scans via UDP. If TCP is used, this port is not needed because the response is given via a configured socket. If you leave the default setting and do not specify a port, the application will select any free port.