Booting from UD Pocket

To connect and configure your UD Pocket, perform the following steps:

1. Connect the UD Pocket to your device via USB port.
   
   
   
2. Start the device.

3. While the device is booting, try pressing [F12] (in general), [F10] (Intel devices), or [F9] (Hewlett-Packard devices) in order to access a list of boot devices and select UD Pocket.

   

   If the above does not work, access the BIOS settings via pressing [Del], [F1] or [F2] during boot and activate booting from USB storage media and/or change the boot order. When in doubt, see the BIOS/UEFI documentation for your system for details of how to boot from USB storage media. See also Boot Settings.

   The device boots into UD Pocket and the Setup Assistant starts.
   

   

   Do not remove UD Pocket from the computer until you have shut down the IGEL OS contained on it. Otherwise, you can damage the operating system on UD Pocket and lose your settings as well as data on other removable media.

Next Step

Initial Setup of the IGEL Device at IGEL OS