In the following article, you will find technical details for IGEL UD3 model M350C, its typical energy consumption, operational conditions, and options for mounting.

IGEL UD3 M350C Connections

Part List

  • Endpoint device
  • Foot stand
  • Power supply with integrated DC cable
  • AC power cord

CAUTION! Strictly follow the power connection note below:

  1. Connect all accessories, e.g. mouse, keyboard, screen (not part of the equipment), and Ethernet.
  2. Connect the AC power cord with the receptacle of the power supply.
  3. Connect the DC cable with the DC in receptacle on the rear side of the device.
  4. Connect the other end of the AC power cord with a suited mains socket.
  5. Switch on the device with the touch sensor on the front side.

IGEL UD3 M350C Technical Specifications


Available operating systemsIGEL OS 11
ManagementIGEL Workspace Edition, registration required

AMD Ryzen™ Embedded R1505G Dual-Core
2 GHz up to 2.7 GHz (boost frequency)

AMD Secure Processor and AMD Memory Guard activated



4 GB (2x 2GB SO-DIMM DDR4 2400 MHz)


8 GB (onboard eMMC)


ChipsetAMD Radeon™ Vega 3 Graphics
Video memory512 MB shared memory

2x DisplayPort 1.2

Multistream support: optional with the DP MST hub

Supported resolutions

2x 4K @60 Hz

Accelerated video decoding support for resolutions up to 2x 4K

Supported video compression standard

H.265 (HEVC)


Ethernet10/100/1000 Ethernet (RJ-45 connector)

integrated Intel® 9260 Wireless-AC (802.11ac WLAN and Bluetooth 5.1); support for WPA / WPA2 / WPA3
SparkLAN WNFT-238AX; support for WiFi-6 (as of 11.07.100)


ChipsetRealtek ALC897 or ALC888S HD Audio
Ports1x 3.5 mm (1/8-inch) TRRS audio jack (CTIA standard)
(line-in / line-out / headset)

1x internal


USB 3.2 Gen 1 or Gen 2
(SuperSpeed USB)

2x front
USB 3.2 Gen 1 Type-C™

1x front
Load to max. 7.5 W. Other alternate modes are not supported.

USB 2.0

2x rear

DisplayPort 1.22x rear
LAN1x rear
Line-in / line-out / headset1x front
12 V DC in1x rear
Security lock1x rear
Smartcard readeroptional: 1x front (built-in HID Omnikey 3121)

1x rear (Prolific PL2303 chipset; incl. 5 V power supply)

Note: The order of the COM ports may change if a USB-to-serial adapter is connected to the UD3 M350C.

Dimensions and Weight

Device (DxWxH), upright

196 x 68 x 198 mm (with foot stand)
188 x 45 x 188 mm (without foot stand)

Device weight

1.08 kg (with foot stand)
1.03 kg (without foot stand)
1.53 kg (with foot stand and external power adapter)

Packaging (DxWxH), horizontal225 x 275 x 95 mm
Packaging weight0.31 kg

Environmental Conditions

Strictly follow safety instructions and respect environmental conditions!

Coolingfanless convection
Operating temperature

vertical (without VESA mount):
0 °C – 40 °C, 32 °F – 104 °F

vertical (with VESA mount):
0 °C – 35 °C, 32 °F – 95 °F

horizontal (with optional rubber feet only):
0 °C – 35 °C, 32 °F – 95 °F

Operating humidity20 % – 80 %, non-condensing

Electrical Data

Power supplyexternal
Power supply AC inputauto sensing 100 – 240 V / 50 – 60 Hz
Power supply DC output

12 V / 4 A (48W) External Power Adapter
Level VI, UL/IEC 62368-1

Power consumption

5.45 W (idle) / 0.59 W (sleep) / < 0.48 W (off)
(@230 V, 50 Hz)

5.32 W (idle) / 0.55 W (sleep) / < 0.48 W (off)
(@115 V, 60 Hz)

Typical Energy Consumption


26.70 kWh (per year, @230 V)
26.23 kWh (per year, @115 V)

ETEC, max33.0 kWh (per year, @230 / 115 V)

Options for Device Mounting

VESA mount

for mounting on the back of a monitor
vertical mounting only!

If you additionally require a cable mount solution, see Mini-PC Cable-Caddy.*

Rubber feetfor horizontal placement of the device


Integrated smartcard readerfor secure smartcard-based authentication
VESA mountfor mounting on the back of a monitor
Rubber feetfor horizontal placement of the device
USB-to-parallel adapterfor connecting peripherals that require a parallel port
USB-to-serial adapterfor connecting peripherals that require a serial port
Integrated WLAN / Bluetooth

for wireless connectivity

For UD3 devices M350C, IGEL recommends the following adapters:

–  for connecting a monitor that requires a DVI port:

–  for configuring multistream transport (MST): 

At lower resolutions (up to 1920 x 1200 @60 Hz), a passive DisplayPort-to-DVI adapter can also be used.

* Non-binding 3d-party product reference