Download PDF
Download page Technical Specification.
Technical Specification
Connections
Part List
- Endpoint device
- Foot stand
- Power supply with integrated DC cable
- AC power cord
- DVI-VGA adapter
- Optional: connectivity bar
CAUTION! Strictly follow the power connection note below:
- Connect all accessories, e.g. mouse, keyboard, screen (not part of the equipment), and Ethernet.
- Connect the AC power cord with the receptacle of the power supply.
- Connect the DC cable with the DC in receptacle on the rear side of the device.
- Connect the other end of the AC power cord with a suited mains socket.
- Switch on the device with the touch sensor on the front side.
Technical Specifications
System
Available operating systems | IGEL OS 11 (LX) |
Management | IGEL Workspace Edition, registration required |
Processor | Intel Celeron J1900 1.99 – 2.42 GHz (Quad-Core), system on a chip (SoC) |
PCIe slot | 1x Gen2 x2, for half-length / low-profile PCIe cards (with full-height bracket up to 120 mm) |
Memory
RAM (DDR3L) | 2 GB (LX) or 4 GB (W10) |
Storage | 4 GB (LX) or 32 GB (W10), larger SSD modules on request |
Graphics
Chipset | Intel HD Graphics |
Video memory | 64 – 512 MB shared memory |
Ports (supported resolutions) | 1x DisplayPort 1.1a (max. 2560 x 1600 @60 Hz) Accelerated video decoding support for resolutions up to |
Supported video compression standard | H.264 |
Network
Ethernet | 10/100/1000 Base-T (RJ-45 connector) |
WLAN | optional: via connectivity bar, 802.11 a/b/g/n |
Audio
Chipset | Realtek High Definition Audio (ALC662) |
Ports | 1x line-out (TRS), 1x mic-in, 1x DisplayPort (Intel HD Audio) |
Speakers | 1x internal |
Interfaces
PS/2 | rear: 1x keyboard |
USB 3.0 | 2x rear |
USB 2.0 | 2x front, 2x rear |
Ethernet | 1x rear |
DisplayPort 1.1.a | 1x rear |
DVI-I | 1x rear |
12 V DC in | 1x rear |
Line-out | 1x rear |
Mic-in | 1x rear |
Security lock | 1x rear |
Smartcard reader | optional: 1x front |
Serial | 2x rear |
Dimensions and Weight
Device (DxWxH), upright | 232 x 99 x 242 mm (with foot stand) |
Device weight | 1.47 kg (without foot stand) |
Packaging (DxWxH), horizontal | 297 x 366 x 125 mm |
Packaging weight | 0.58 kg |
Environmental Conditions
Strictly follow safety instructions and respect environmental conditions!
Cooling | fanless convection |
Operating temperature | vertical: horizontal (with optional rubber feet only): |
Operating humidity | 20 % – 80 %, non-condensing |
Electrical Data
Power supply | external |
Power supply AC input | auto sensing 100 – 240 V / 50 – 60 Hz |
Power supply DC output | 12 V / 4 A External Power Adapter |
Power consumption | 7.12 W (idle) / 0.88 W (sleep) / < 0.82 W (off) |
Typical Energy Consumption
(ENERGY STAR, 7.0)
ETEC | 25.92 kWh (per year, @230 V) |
ETEC, max | 33.0 kWh (per year, @230 / 115 V) |
Options for Device Mounting
VESA mount | for mounting on the back of a monitor |
Rubber feet | for horizontal placement of the device |
Connectivity Bar
Option 1 | 1x parallel port and 1x anti-theft USB 2.0 port |
Option 2 | 1x parallel port and 1x 802.11a/b/g/n WLAN |
Optional Accessories
Integrated smartcard reader | for secure smartcard-based authentication |
VESA mount | for mounting on the back of a monitor |
Rubber feet | for horizontal placement of the device |
DisplayPort-to-DVI adapter | for connecting a monitor that requires a DVI port |
USB-to-serial adapter | for connecting peripherals that require a serial port |
USB-to-parallel adapter | for connecting peripherals that require a parallel port |
Connectivity bar | 1) for secure USB connection and for connecting peripherals that require a parallel port, or |