Download PDF
Download page Technical Specification.
Technical Specification
Connections
Part List
- Endpoint device
- Foot stand
- Power supply with integrated DC cable
- AC power cord
- Optional: connectivity bar
- Optional: external WLAN antenna as a part of Intel® 9260 Wireless-AC WLAN and Bluetooth
CAUTION! Strictly follow the power connection note below:
- Connect all accessories, e.g. mouse, keyboard, screen (not part of the equipment), and Ethernet.
- Connect the AC power cord with the receptacle of the power supply.
- Connect the DC cable with the DC in receptacle on the rear side of the device.
- Connect the other end of the AC power cord with a suited mains socket.
- Switch on the device with the touch sensor on the front side.
Technical Specifications
System
Available operating systems | IGEL OS 11 (LX) |
Management | IGEL Workspace Edition, registration required |
Processor | AMD RX-216GD 1.6 GHz (Dual-Core) up to 3.0 GHz (boost mode), |
PCIe slot | 1x Gen2 x2, for half-length / low-profile PCIe cards (with full-height bracket up to 111.6 mm) |
Memory
RAM | 4 GB (DDR4) |
Storage | 4 GB (LX) or 32 GB (W10), larger SSD modules on request |
Graphics
Chipset | AMD Radeon graphics |
Video memory | 64 – 512 MB shared memory |
Ports (supported resolutions) | Standard: 3x DisplayPort 1.2 With optional graphics card: 4x DisplayPort 1.2 Multistream support (daisy chain) depends on configuration Accelerated video decoding support for resolutions up to 1x 4K. (Note: if the optional external graphics card is used, resolution is available on its DisplayPort) |
Supported video compression standard | H.264 |
Network
Ethernet | 10/100/1000 Base-T (RJ-45 connector) |
Wireless | optional: |
Audio
Chipset | Realtek High Definition Audio (ALC662) |
Ports | 1x line-out (TRS), 1x mic-in, 1x DisplayPort (Intel HD Audio) |
Speakers | 1x internal |
Interfaces
USB 2.0 | 3x rear |
USB 3.0 | 2x front |
DisplayPort 1.2 | 3x rear |
Smartcard reader | optional: 1x front |
Ethernet | 1x rear |
PS/2 | rear: 1x keyboard |
12 V DC in | 1x rear |
Line-out | 1x rear |
Mic-in | 1x rear |
Security lock | 1x rear |
Serial | 1x rear |
Dimensions and Weight
Device (DxWxH), upright | 232 x 99 x 242 mm (with foot stand) |
Device weight | 1.60 kg (with foot stand and external power adapter) |
Packaging (DxWxH), horizontal | 297 x 366 x 125 mm |
Packaging weight | 0.56 kg |
Environmental Conditions
Strictly follow safety instructions and respect environmental conditions!
Cooling | fanless convection |
Operating temperature | vertical (without VESA mount): vertical (with VESA mount): horizontal (with optional rubber feet only): horizontal (with optional rubber feet and additional graphics card): |
Operating humidity | 20 % – 80 %, non-condensing |
Electrical Data
Power supply | external |
Power supply AC input | auto sensing 100 – 240 V / 50 – 60 Hz |
Power supply DC output | 12 V / 3 A External Power Adapter |
Power consumption | 5.7 W (idle) / 1.2 W (sleep) / < 0.8 W (off) |
Typical Energy Consumption
(ENERGY STAR, 7.1)
ETEC | 23.09 kWh (per year, @230 V) |
ETEC, max | 33.0 kWh (per year, @230 / 115 V) |
Options for Device Mounting
VESA mount | for mounting on the back of a monitor (VESA75, VESA100) |
Rubber feet | for horizontal placement of the device |
Connectivity Bar
Option 1 | 1x parallel port and 1x anti-theft USB 2.0 port |
Option 2 | 1x parallel port and 1x 802.11 a/b/g/n WLAN |
Optional
Integrated smartcard reader | for secure smartcard-based authentication |
VESA mount | for mounting on the back of a monitor |
Rubber feet | for horizontal placement of the device |
for the use of the fourth monitor via 1x DisplayPort 1.2 (max. 2560x1600) | |
USB-to-serial adapter | for connecting peripherals that require a serial port |
USB-to-parallel adapter | for connecting peripherals that require a parallel port |
Connectivity bar | 1) for secure USB connection and for connecting peripherals that require a parallel port, or |
Integrated WLAN / Bluetooth | for wireless connectivity |
Tip
For UD7 devices H850C, IGEL recommends the following adapters:
– for connecting a monitor that requires a DVI port:
- DisplayPort to HDMI Active Adapter from Plugable (requires an additional HDMI-to-DVI adapter cable)
At lower resolutions (up to 1920 x 1200 @60 Hz), a passive DisplayPort-to-DVI adapter can also be used.