IGEL UD7 H860C: Technical Specification

In the following article, you will find technical details for IGEL UD7 model H860C, its typical energy consumption, operational conditions, and options for mounting.

IGEL UD7 H860C Connections

Part List

Endpoint device
Foot stand
Power supply with integrated DC cable
AC power cord

CAUTION! Strictly follow the power connection note below:

Connect all accessories, e.g. mouse, keyboard, screen (not part of the equipment), and Ethernet.
Connect the AC power cord with the receptacle of the power supply.
Connect the DC cable with the DC in receptacle on the rear side of the device.
Connect the other end of the AC power cord with a suited mains socket.
Switch on the device with the touch sensor on the front side.

IGEL UD7 H860C Technical Specifications

System

Available operating systems

IGEL OS 11

Management

IGEL Workspace Edition, registration required

Processor

AMD Ryzen Embedded V1605B, Quad-Core
2 GHz up to 3.6 GHz

AMD Secure Processor and AMD Memory Guard activated

Memory

RAM	2x 4GB SO-DIMM DDR4 2666 MHz
Storage	8 GB (onboard eMMC)

Graphics

Chipset	AMD Radeon™ Vega 8 Graphics
Video memory	2 GB (can be set up in BIOS to max. 4 GB for the optimal 4K video decoding)
Ports	4x DisplayPort 1.2
Supported resolutions	4x 4K @60 Hz incl. audio support
Supported video compression standard	H.264 H.265 (HEVC)

Network

Ethernet	optional: 10/100/1000 Ethernet RJ-45 or fiber optics small form factor pluggable (SFP); for laser class 1 optical transceivers only
Wireless	optional: integrated Intel® 9260 Wireless-AC (802.11ac WLAN and Bluetooth 5.1); support for WPA / WPA2 / WPA3

Audio

Chipset	Realtek ALC256 HD Audio
Ports	1x 3.5 mm (1/8-inch) TRRS audio jack (CTIA standard) (line-in / line-out / headset)
Speakers	1x internal

Interfaces

USB 3.2 Gen 1 Type-A™ (SuperSpeed USB)	2x front
USB 3.2 Gen 2 Type-C™ (SuperSpeed USB)	1x front Load to max. 7.5 W. Support for alternate mode DisplayPort 1.4 DisplayPort 4 is disabled when Type-C™ is connected to a monitor.
USB 2.0 Type-A	4x rear
DisplayPort 1.2	4x rear
LAN	1x rear
Line-in / line-out / headset	1x front
12 V DC in	1x rear
Security lock	1x rear
Smartcard reader	optional: 1x front (built-in HID Omnikey 3121)
Serial	1x rear (incl. 5 V power supply)

Dimensions and Weight

Device (DxWxH), upright	204 x 68 x 206 mm (with foot stand) 196 x 48 x 196 mm (without foot stand)
Device weight	1.19 kg (without foot stand) 1.25 kg (with foot stand) 1.52 kg (with foot stand and external power adapter)
Packaging (DxWxH), horizontal	225 x 275 x 95 mm
Packaging weight	0.31 kg

Environmental Conditions

Strictly follow safety instructions and respect environmental conditions!

Cooling

fanless convection

Operating temperature

vertical (without VESA mount):
0 °C – 40 °C, 32 °F – 104 °F

vertical (with VESA mount):
0 °C – 35 °C, 32 °F – 95 °F

horizontal (with optional rubber feet only):
0 °C – 35 °C, 32 °F – 95 °F

Operating humidity

20 % – 80 %, non-condensing

Electrical Data

Power supply	external
Power supply AC input	auto sensing 100 – 240 V / 50 – 60 Hz
Power supply DC output	12 V / 5 A (60W) External Power Adapter Level VI, UL/IEC 62368-1
Power consumption	Excl. WLAN: 5.90 W (idle) / 0.36 W (sleep) / < 0.29 W (off) (@230 V, 50 Hz) 5.73 W (idle) / 0.35 W (sleep) / < 0.28 W (off) (@115 V, 60 Hz) Incl. WLAN: 6.62 W (idle) / 0.36 W (sleep) / < 0.29 W (off) (@230 V, 50 Hz) 6.43 W (idle) / 0.35 W (sleep) / < 0.28 W (off) (@115 V, 60 Hz)

Options for Device Mounting

VESA mount

for mounting on the back of a monitor
vertical mounting only!

If you additionally require a cable mount solution, see Mini-PC Cable-Caddy.*

Rubber feet

for horizontal placement of the device

Optional

Integrated smartcard reader	for secure smartcard-based authentication
VESA mount	for mounting on the back of a monitor
Rubber feet	for horizontal placement of the device
USB-to-parallel adapter	for connecting peripherals that require a parallel port
USB-to-serial adapter	for connecting peripherals that require a serial port
Integrated WLAN / Bluetooth	for wireless connectivity

Tip
For UD7 devices H860C, IGEL recommends the following adapters:

– for connecting a monitor that requires a DVI port:

Mini DisplayPort to 2 Port DVI-D MST Hub from LINDY in combination with the DisplayPort to Mini DisplayPort Adapter from LINDY
DisplayPort to HDMI Active Adapter from Plugable (requires an additional HDMI-to-DVI adapter cable)

At lower resolutions (up to 1920 x 1200 @60 Hz), a passive DisplayPort-to-DVI adapter can also be used.

* Non-binding 3d-party product reference

Download PDF