Connections

Part List

  • Endpoint device
  • Foot stand
  • Power supply with integrated DC cable
  • AC power cord

CAUTION! Strictly follow the power connection note below:

  1. Connect all accessories, e.g. mouse, keyboard, screen (not part of the equipment), and Ethernet.
  2. Connect the AC power cord with the receptacle of the power supply.
  3. Connect the DC cable with the DC in receptacle on the rear side of the device.
  4. Connect the other end of the AC power cord with a suited mains socket.
  5. Switch on the device with the touch sensor on the front side.

Technical Specifications

System

Available operating systemsIGEL OS 11
ManagementIGEL Workspace Edition, registration required
Processor

AMD Ryzen Embedded V1605B, Quad-Core
2 GHz up to 3.6 GHz

AMD Secure Processor and AMD Memory Guard activated

Memory

RAM

2x 4GB SO-DIMM DDR4 2666 MHz

Storage

8 GB (onboard eMMC)

Graphics

Chipset

AMD Radeon™ Vega 8 Graphics

Video memory2 GB (can be set up in BIOS to max. 4 GB for the optimal 4K video decoding)
Ports

4x DisplayPort 1.2

Supported resolutions

4x 4K @60 Hz incl. audio support

Supported video compression standard

H.264
H.265 (HEVC)

Network

Ethernet

optional: 10/100/1000 Ethernet RJ-45
or
fiber optics small form factor pluggable (SFP); for laser class 1 optical transceivers only

Wireless

optional: integrated Intel® 9260 Wireless-AC (802.11ac WLAN and Bluetooth 5.0)

Audio

ChipsetRealtek ALC256 HD Audio
Ports1x 3.5 mm (1/8-inch) TRRS audio jack (CTIA standard)
(line-in / line-out / headset)
Speakers

1x internal

Interfaces

USB 3.2 Gen 1 Type-A™
(SuperSpeed USB)

2x front
USB 3.2 Gen 2 Type-C™
(SuperSpeed USB)

1x front
Load to max. 7.5 W. 
S
upport for alternate mode DisplayPort 1.4

DisplayPort 4 is disabled when Type-C™ is connected to a monitor.

USB 2.0 Type-A

4x rear

DisplayPort 1.24x rear
LAN1x rear
Line-in / line-out / headset1x front
12 V DC in1x rear
Security lock1x rear
Smartcard readeroptional: 1x front
Serial1x rear (incl. 5 V power supply)

Dimensions and Weight

Device (DxWxH), upright

204 x 68 x 206 mm (with foot stand)
196 x 48 x 196 mm (without foot stand)

Device weight

1.19 kg (without foot stand)
1.25 kg (with foot stand)
1.52 kg (with foot stand and external power adapter)

Packaging (DxWxH), horizontal225 x 275 x 95 mm
Packaging weight0.31 kg

Environmental Conditions

Strictly follow safety instructions and respect environmental conditions!

Coolingfanless convection
Operating temperature

vertical (without VESA mount):
0 °C – 40 °C, 32 °F – 104 °F

vertical (with VESA mount):
0 °C – 35 °C, 32 °F – 95 °F

horizontal (with optional rubber feet only):
0 °C – 35 °C, 32 °F – 95 °F

Operating humidity20 % – 80 %, non-condensing

Electrical Data

Power supplyexternal
Power supply AC inputauto sensing 100 – 240 V / 50 – 60 Hz
Power supply DC output

12 V / 5 A (60W) External Power Adapter
Level VI, UL/IEC 62368-1

Power consumption

Excl. WLAN: 
5.90 W (idle) / 0.36 W (sleep) / < 0.29 W (off) (@230 V, 50 Hz) 
5.73 W (idle) / 0.35 W (sleep) / < 0.28 W (off) (@115 V, 60 Hz)

Incl. WLAN: 
6.62 W (idle) / 0.36 W (sleep) / < 0.29 W (off) (@230 V, 50 Hz) 
6.43 W (idle) / 0.35 W (sleep) / < 0.28 W (off) (@115 V, 60 Hz)

Typical Energy Consumption
(ENERGY STAR, 8.0)

ETEC

28.47 kWh (per year, @230 V)
27.34 kWh (per year, @115 V)

ETEC, max33.0 kWh (per year, @230 / 115 V)

Options for Device Mounting

VESA mount

for mounting on the back of a monitor
vertical mounting only!

Rubber feetfor horizontal placement of the device

Optional

Integrated smartcard readerfor secure smartcard-based authentication
VESA mountfor mounting on the back of a monitor
Rubber feetfor horizontal placement of the device
USB-to-parallel adapterfor connecting peripherals that require a parallel port
USB-to-serial adapterfor connecting peripherals that require a serial port
Integrated WLAN / Bluetooth

for wireless connectivity

Tip
For UD7 devices H860C, IGEL recommends the following adapters:

–  for connecting a monitor that requires a DVI port:

At lower resolutions (up to 1920 x 1200 @60 Hz), a passive DisplayPort-to-DVI adapter can also be used.