Menu path: Setup > Sessions > VoIP Client > User Account

You can set up or change one or more user accounts as well as specify the name displayed.

  • Full Name: Name of the user; this name will be shown to the other person. Example: John Doe

To set up an SIP user account, proceed as follows:
Ensure that the VoIP client was terminated before you start setting up or changing a user account. Changes will only be saved if the client is not running.
  1. Click .
  2. If the user account is to be active once set up, enable the Enable Account option.
  3. Enter the following data:
    • Protocol: Select SIP.
    • Name: Name for this user account.
    Choose a name which allows a distinction to be made easily between a number of user accounts.
    • Registrar: URI with which the VoIP client registers. This can be a DNS name or an IP address.
    • User name: Numerical or alphanumerical value. The user name is part of the SIP address. Example: john.doe in john.doe@example.com
    • Login Name: Numerical or alphanumerical value. Name with which the VoIP client registers on the registrar. This name can differ from the name given under user name.
    • Password: Password with which the VoIP client registers on the registrar
    • Registration Update Timeout: Timeout after which the registration should be updated
  4. Click Ok.
    The user account has been set up.