Connecting Signature Pads

You can connect signature pads from the following manufacturers:

  • StepOver
  • signotec

To enable them go to Setup > User Interface > Input > Signature Pad.

To configure a serial connection in order to be able to use USB signature pads from this manufacturer, proceed as follows:

  1. Under HDX/ICA Global or RDP Global, go to Mapping > COM Ports
  2. Enable COM Port Mapping.
  3. Click on Add

  4. Click Detect Devices....
  5. Select your device.
    Your signature pad can now be used.

Last update: June 28, 2018