Download page Printers.
Menu path: Devices > Printer > CUPS > Printers
Printers can be created and edited here.
Click on to open the Add dialog.
In the edit dialog, specify a Printer name which begins with a letter.
Printer port: Interface type for locally connected printers or the network protocol for network printers.
- "Parallel port printer" (default)
- "Serial port printer"
- "USB printer"
- "USB class printer"
- "LPD network printer"
- "TCP network printer"
- "IPP network printer"
- "SMB network printer"
Depending on the chosen Printer port type, different parameters have to be configured, see Settings to Be Configured for Each Printer Port Type.
Manufacturer: List of possible printer manufacturers. When you select a manufacturer here, the relevant selection of models will be provided under Printer names. (Example: Generic)
Printer names: List of possible printer models. (Example: PostScript Printer)
Default paper size: Set the printer-specific paper size that you would like to use as a default.
- "System setting"
☑ You can access the printer via the network if you have enabled the print server under IPP Printer Sharing; see IPP Printer Sharing. (Default)
Mapping in sessions
Map printer in NX sessions
☑ The printer is available in NX sessions.
☐ The printer is not available in NX sessions. (Default)
Map printer in Parallels Client sessions
☑ The printer is available in Parallels Client sessions.
☐ The printer is not available in Parallels Client sessions. (Default)
Map printer in ICA sessions
☑ The printer is available in ICA sessions. (Default)
Map printer in RDP sessions
☑ The printer is available in RDP sessions. (Default)
Use Windows driver name from list
☑ A driver name from the following list will be used. (Default)
Manufacturer: List of possible printer manufacturers. (Example: Generic)
Model: List of possible models. (Example: Generic PostScript)
Use custom Windows driver name
☑ Enter the name of your driver here if it is not mentioned in the list above.
Printer driver: Windows driver name for the printer.
When printing in ICA and RDP sessions, the print data are normally prepared for the printer model by the Windows printer driver and are passed unchanged from the device to the printer. An exception is made when using the Windows driver in ICA sessions, Manufacturer is set to "Generic" and Model is set to "Generic PostScript." In this case, the print data are prepared on the device with the help of the printer driver defined above under Printer for the printer model. This requires device resources.