Supported Devices

IntelliTouch Plus/iTouch Plus 2515-07(non HID), 2521 (HID), 2515-00(HID) PCAP 2 touch, 4 touch and 10 touch controllers.

Setup Parameters

  • Touchscreen type
 More


IGEL Setup > User Interface > Input > Touchscreen

> Touchscreen type

userinterface.touchscreen.driver



Calibration / Reset

Calibrating the touchscreen:

  1. Go to IGEL Setup > User Interface > Input > Touchscreen.
  2. Set Touchscreen already calibrated to 'false'.

     More


    IGEL Setup > User Interface > Touchscreen

    > Touchscreen already calibrated

    userinterface.touchscreen.calibrated

    enabled / disabled


  3. Set Touchscreen type to Elo Multitouch (USB).

     More


    IGEL Setup > User Interface > Input > Touchscreen

    > Touchscreen type

    userinterface.touchscreen.driver



  4. Reboot the device or click in IGEL Setup Accessories > Touchscreen Calibration to use the IGEL touchscreen calibration tool.
    This will call the proprietary ELO Multitouch calibration tool which is located at /etc/opt/elo-mt-usb/elova. The calibration parameter will be saved in /wfs/elo-usb.d/MT-USBConfigData.

Hold-to-Right-Click Feature

To activate the feature:

  1. Enable the option Emulate right button under User Interface > Input > Touchscreen.

     More


    IGEL Setup > User Interface > Input > Touchscreen

    > Emulate right button

    userinterface.touchscreen.emulatethirdbutton

    enabled / disabled


  2. Set under Right button timeout the time after which right-click is generated.

     More


    IGEL Setup > User Interface > Input > Touchscreen

    > Right button timeout

    userinterface.touchscreen.emulatethirdbuttontimeout

    Default: 1000 msec


Multimonitor

Multiple ELO Multitouch (USB) touchscreens on a single IGEL device are supported. Calibration of the second ELO Multitouch USB touchscreen can be done via command line by using: /etc/opt/elo-mt-usb/elova --videoscreen=2 where 2 is the second ELO Multitouch touchscreen connected to the IGEL device.


To view a list of video and USB touchscreen devices available for calibration, use the command: /etc/opt/elo-mt-usb/elova --viewdevices.