Skip to main content
Skip table of contents

Fabulatech USB Redirection for Citrix in IGEL OS

Redirection for USB devices can be allowed or denied during an RDP session using rules and sub-rules for specific devices or device classes. The use of rules is described in detail under USB Access Control.

Important Notes

  • For the Fabulatech USB Redirection, a server-side component is required. We recommend the USB for Remote Desktop IGEL Edition; see http://www.usb-over-network.com/partners/igel/. For details on the configuration, see https://www.usb-over-network.com/partners/igel/usb-for-remote-desktop-docs.html. Please note that licenses must be purchased from Fabulatech to enable this functionality.

  • Enable either native USB redirection or Fabulatech USB Redirection – not both together.

  • Disable USB redirection if you use DriveLock.

  • Ensure that no other hotplug storage device (USB memory stick) is connected before you enable Fabulatech USB redirection. Otherwise, the hotplug storage device is insecurely removed.

  • Generally, Fabulatech USB Redirection might not be the ideal solution for each use case. For details, refer to the general device redirection recommendations of your terminal server or VDI vendor.


Menu path: Sessions > Citrix > Citrix Global > Fabulatech USB Redirection

Fabulatech USB Redirection

  • Fabulatech USB Redirection is enabled for all Citrix sessions.
  • Fabulatech USB redirection is disabled. (Default)

Default rule

This rule will apply if no special rule was configured for a class or a device.
Possible options:

  • Deny (Default)

  • Allow

Tip

To secure your endpoint, it is generally recommended to set Default rule to Deny and to configure Allow rules only for the required USB devices and USB device classes. 

Class Rules

Class rules apply to USB device classes and sub-classes.

Managing rules:

→ Click image-20240610-062539.png to create a new entry.

→ Click image-20240610-062604.png to remove the selected entry.

→ Click image-20240610-062631.png to edit the selected entry.

→ Click image-20240610-062649.png to copy the selected entry.

Class rule properties:

Rule:

  • Allow: Devices that have the properties defined here are redirected by the Fabulatech USB Redirection.

  • Deny: Devices that have the properties defined here are not redirected.

Class ID: Device class

Subclass ID: Subclass relating to the specified device class

Name: Free text entry

Override serial: Serial number that will appear in the session

Override name: Device name that will appear in the session

Postpone

  • The USB device is only removed from the system (endpoint device) when the session starts.
  • The USB device is no longer shown immediately after the system is booted. (Default)

This setting is only effective if the Takeaway parameter is enabled.

Takeaway

  • The USB device may be removed from the system (endpoint device).
  • The USB device may not be removed. (Default)

No Reset

  • The device will not be automatically reset after the connection with the session has been terminated.
  • The device will be reset after the connection with the session has been terminated. (Default)

Device Rules

A device rule applies to a specific device that is identified by its serial number.

Device rule settings:

Rule:

  • Allow (Default)

  • Deny

Vendor ID: Hexadecimal manufacturer number

Product ID: Hexadecimal device number

Getting USB Device Information

To find out the Class IDSubclass IDVendor ID and Product ID of the connected USB device, you can use the System Information tool. For further information, see Using System Information Function.

System Information example:

Alternatively, you can use the command lsusb (or lsusb | grep -i [search term]) in the terminal.

Example for lsusb:

Name: Free text entry

Override serial: Serial number that will appear in the session.

Override name: Device name that will appear in the session.

Postpone

  • The USB device is only removed from the system (endpoint device) when the session starts. (Default)
  • The USB device is no longer shown immediately after the system is booted.

This setting is only effective if the Takeaway parameter is enabled.

Takeaway

  • The USB device may be removed from the system (endpoint device). (Default)
  • The USB device may not be removed.

No Reset

  • The device will not be automatically reset after the connection with the session has been terminated. (Default)
  • The device will be reset after the connection with the session has been terminated.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.