Skip to main content
Skip table of contents

Partition Configuration in IGEL OS

Menu path: Setup > System > Firmware Configuration > Custom Partition > Partition

Here, you can create a partition of your own.

  • Enable partition

    • The customer partition is enabled in the IGEL Setup of the thin client or with the IGEL Universal Management Suite via the setup path.
    • The customer partition is not enabled. (default)
  • Size: Size of the partition. A number must be followed by a multiplicative ending, without a space in between. Example: "100K" stands for 100 Kibibytes, that is, 100 * 1024 bytes.
    The following multiplicative endings are possible (capital letters required):
    K for kibibytes (number * 1024)
    M for mebibytes (number * 1024 * 1024)
    G for gibibytes (number * 1024 * 1024 * 1024)

    Sensible values are for example "100K" (for 100 KiB = 100 * 1024 bytes) or "100M" (for 100 MiB = 100 * 1024 * 1024 bytes). The size of the partition should be set to at least 100 KiB. However, no more than 300 MiB should be reserved for the customer-specific partition (based on the 1 GB standard CF used in IGEL Linux thin clients). This is because subsequent firmware updates may require more storage space than the current version.

  • Mount point: Path on which the partition is to be mounted. (default: /custom)

  • Partitions parameters: From IGEL OS Version 10.03.100, you can enter name value pairs which are passed on to the custom partition for further processing.
    To manage the list, proceed as follows:

    • Click image-20240611-195535.png to create a new parameter.

    • Click image-20240611-195547.png to remove the selected parameter.

    • Click image-20240611-195555.png to edit the selected parameter.

    • Click image-20240611-195602.png to copy the selected parameter.

Add

  • Name: Name of the parameter

  • Value: Value of the parameter

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.