Skip to main content
Skip table of contents

Disabling USB Boot

Rationale

Disabling USB ´boot prevents booting another operating system, which could be used to manipulate or (even accidentally) overwrite IGEL OS on mass storage.

Instructions for IGEL Devices

USB boot is disabled in the factory settings on IGEL UD LX devices. If it has been enabled and you want to disable it again, follow the instructions given here:

  1. Hold down the [Del] key ([F2] key for UD2) while the system is booting.
    The UEFI menu opens.

  2. Use the arrow and return keys to go to SCU.

  3. Enter the UEFI password if one is set.
    The Setup Utility opens.

  4. Go to Boot.

  5. Set USB Boot to Disabled.

  6. Press [F10].

  7. Confirm Exit Saving Changes?
    The device boots.

    Additionally, set a UEFI Password so the boot settings cannot be changed back.


Instructions for 3rd-Party Devices Converted with OSC

->Refer to the instructions of your BIOS/UEFI vendor.

Alternatively, try pressing [F12] (in general), [F10] (Intel devices), or [F9] (Hewlett-Packard devices) to access the BIOS/UEFI settings. If this does not work, try pressing [Del], [F1], or [F2] during booting.



JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.