Menu path: Sessions > ThinLinc > ThinLinc Sessions > [Session Name] > Login

Method of authentication: A method used for the authentication.
Possible values:

  • "Password"
  • "Public key"
  • "Smartcard"
  • "Kerberos"

User: The user credentials are taken from Setup > Sessions > ThinLinc > ThinLinc Sessions > [Session Name] > Server > User.

Password: A password specified under Setup > Sessions > ThinLinc > ThinLinc Sessions > [Session Name] > Server > Password is used for the authentication. (Available if Password is selected as Method of authentication).

If modified here (under Login), User and Password will automatically be changed under Setup > Sessions > ThinLinc > ThinLinc Sessions > [Session Name] > Server.

The following settings can be configured if Smartcard is used as a Method of authentication.

Smartcard only 

Use certificate subject as name for login

☑ The certificate subject will be used as login name. (Default)

☐ The user credentials from Setup > Sessions > ThinLinc > ThinLinc Sessions > [Session Name] > Server > User  will be used as login name.

Connect the client automatically if a smartcard is found 

☑ The client will be connected automatically if a smartcard is detected (available if Use subject of smartcard as name for login is enabled). (Default)

☐ The client will not be connected automatically by the smartcard detection.

Disconnect the client automatically when the smartcard is removed

☑ The client will be disconnected automatically if the smartcard is removed. (Default)

☐ The client will not be disconnected at the smartcard removal.

Allow transmission of the smartcard's passphrase for logging in

☑  The transmission of the smartcard's passphrase for logging in is allowed. 

☐ The transmission of the smartcard's passphrase for logging in is not allowed. (Default)

The transmission of the smartcard's passphrase is not recommended by Cendio.

Smartcard filter: The smartcard filter must be specified in the format described under "SMARTCARD_FILTER_n" in https://www.cendio.com/resources/docs/tag/clientconf.html.