1. In the main menu, press [2] to configure the DHCP range for the built-in DHCP server.
    The DHCP range menu opens.

  2. Enter the following parameters:
    • Start IP address: Lowest IP address of the DHCP range.
    • End IP address: Highest IP address of the DHCP range.
    • Lease time: Time span during which an IP address is reserved for a device.

  3. Press [Y] to confirm the settings.
    The DHCP server will restart and assign IP addresses to all devices in the network.

    It is possible to exclude a device from being configured by the built-in DHCP server. For further information, see Adding a MAC Address to the Filter.
    It is possible to use your own DHCP server instead of the built-in DHCP server of the Deployment Appliance, see Using Your Own DHCP Server.