Menu path: Setup > Network > LAN Interfaces > Wireless > Default Wi-Fi Network

Here you can configure wireless network connections.

Disable encryption: No encryption will be used. (default)

Enable WEP encryption: WEP encryption will be used.

Enable WPA encryption: WPA encryption will be used.

You will need to give further information depending on the encryption method chosen.

Wireless network name (SSID): Name of the wireless network (SSID)

For WEP encryption

Transmit key ID: Choose from a maximum of four configurable keys (default 1).

Key format:

  • ASCII
  • Hexadecimal

Key [1 - 4]: Enter the key here.

Characters to be entered for WEP keys:
  • For 64 bit encryption, 5 characters (ASCII) or 10 hex digits (hexadecimal)
  • For 128 bit encryption, 13 characters (ASCII) or 26 hex digits (hexadecimal)

For WPA encryption

Network authentication:

  • WPA Personal: Wi-fi Protected Access pre-shared key (WPA / IEEE 802.11i/D3.0)
  • WPA Enterprise: Wi-fi Protected Access with 802.1X authentication (WPA / IEEE 802.11i/D3.0)
  • WPA2 Personal: Wi-fi Protected Access pre-shared key (WPA2 / IEEE 802.11i/RSN)
  • WPA2 Enterprise: Wi-fi Protected Access with 802.1X authentication (WPA2/IEEE 802.11i/RSN)

Network key: WPA network key/passphrase as set at the dial-in point. This is either an ASCII character string with a length of 8...63 or exactly 64 hexadecimal digits.

Show

The network key is shown.

The network key is hidden. (Default) 

Data encryption:

  • TKIP: Temporal Key Integrity Protocol (IEEE 802.11i/D7.0)
  • AES (CCMP): AES in counter mode with CBC-MAC (RFC 3610, IEEE 802.11i/D7.0)