Skip to main content
Skip table of contents

USB Access Control

Menu path: Devices > USB Access Control

You can allow or prohibit the use of USB devices on your endpoint. Specific rules for individual devices or device classes are possible. For an example, see How to Configure USB Access Control.

Enable

☑ USB access control is enabled and the following settings can be configured.

☐ USB access control is inactive. (Default)

The activation of USB Access Control and setting the Default rule to Deny will block the use of USB devices locally and in the session and, thus, might disable devices needed for the users. Therefore, activate the USB access control only if your security policy requires that. In this case, set Default rule to Deny and configure Allow rules for the required USB devices and USB device classes. 

It is recommended to make settings for USB Access Control as the last step in the device configuration. Before activating the USB access control, check that all your other settings for printers, Unified Communication, USB redirections, mapping settings for USB devices are working as expected.

Note that the USB access control is completely separate than USB redirection for remote sessions, see When to Use USB Redirection.

Take also notice that the feature does not disable a USB port physically, i.e. power delivery will still work.

Default rule: Specifies whether the use of USB devices is allowed or prohibited.

  • Allow (Default)

  • Deny

Default permission: Default access rights for USB devices.

  • Read Only

  • Read/Write (Default)

Class Rules

Class rules apply to USB device classes.

→ Click on image-20240611-191717.png to create a new rule.
An input mask with the following options will open:

Rule: Specifies whether the use of the device class defined here is allowed or prohibited.

Class ID: Device class for which the rule should apply. (Examples: Audio, Printers, Mass Storage).

Name: Name of the rule

Device Rules

Device rules apply to specific USB devices.

→ Click on image-20240611-191717.png to create a new rule.
An input mask with the following options will open:

Rule: Specifies whether the use of the device defined here is allowed or prohibited.

Vendor ID: Hexadecimal ID of the device manufacturer

Product ID: Hexadecimal ID of the device

Getting USB Device Information

To find out the Class IDSubclass IDVendor ID and Product ID of the connected USB device, you can use the System Information tool. For further information, see Using System Information Function.

System Information example:

Alternatively, you can use the command lsusb (or lsusb | grep -i [search term]) in the terminal.

Example for lsusb:

Device uuid: Universal Unique Identifier of the device

Permission: Authorizations for access to the device
Possible values: 

  • Global setting: The default setting for hotplug storage devices is used; see the Default permission parameter under Devices > Storage Devices > Storage Hotplug. (Default)

  • Read only

  • Read/Write

Name: Name of the rule

Further setting options can be found under Storage Hotplug.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.