Resolved Issues 11.04.100

Citrix

• "Green artifacts" problem in Citrix sessions (most probably) fixed.

• Citrix hardware video acceleration supports the latest Intel hardware.

OSC Installer

• Fixed issue with filesystems not always get detected correctly in initramfs OSC Installer (needed for using iso file boot parameter).

• Fixed: username and password in the error message are not shown anymore when firmware file could not be downloaded.

• Get URLs with username:password@ working.

RDP/IGEL RDP Client 2

• Fixed error when renaming a non-empty shared folder.

WVD

• Includes WVD client with fixed RDcoreSDK version.

• Clipboard redirection has potential privacy and security risks and is therefore disabled by default.

• IGEL WVD Client integrated

VMware Horizon

• Fixed missing support for ThinPrint and Skype for Business when starting Horizon from Firefox browser.

Firefox

• Fixed Firefox block extension missing tabs created via command line argument.

• Fixed rtsp media stream with enabled apparmor.

• Show "blocked" page instead of closing tab when blocked page is viewed in Firefox.

• Fixed functionality in the local setup to start the certificate manager of the Firefox browser.

• Fixed functionality in the local setup to start the Firefox browser with the internal page to show the installed plugins. 

• Fixed restart mechanism in the Firefox browser where the browser could not be closed on suspend resulting in a superfluous browser window on resume.

Network

• Improved Wi-Fi DHCP lease handling: Leases are discarded when the network changes. The former behavior caused problems with certain iPhone IOS versions.

• 802.1X failures now generally result in falling back to a connection without authentication, e.g. also in the case of 802.1X settings that don't make sense at all. This only applies if the fallback is allowed of course.

• wpa_supplicant now adds timestamps to entries of its log file.

• Use e1000e driver out of the kernel as default instead of the third-party driver.

• Added a registry key that determines whether lldpd is in receive-only mode.

  More...

  Parameter	Disable sending LLDP packets
  Registry	network.lldp.rxonly
  Value	true
  Attention:	If the behavior since 10.06.100 shall be preserved, this key must be set to "false".

• Updated scep to version 0.7.0.

Wi-Fi

• Fixed non-working Marvell WLAN device 8997 (SDIO version).

NCP VPN

• Added fix for NCP Secure Client.

genucard VPN

• genucard 3 is supported now.

Imprivata

• Control the visibility of the Horizon session control bar via registry parameter:

  More...

  Registry	vmware.view.menu-bar
  Value	enabled / disabled

• Honor the Citrix Window Configuration in Imprivata Appliance Mode. 

• Fixed Lock key and Tap out behavior. 

• Fixed MS RDSH session.

• Simplified the configuration of Imprivata FUS.

• Enable the following if you use Imprivata versions above 6.3:

  More...

  Registry	imprivata.gain_permission
  Value	enabled / disabled

• Fixed bug regarding Imprivata and On-Screen Keyboard.

• Restore the keyboard map after Horizon sessions.

Smartcard

• Fixed not working 90meter in Firefox when apparmor is active.

• Fixed problem in smartcard resource manager PC/SC-Lite which caused disconnects of VMware Horizon sessions when using smartcards with certain applications.

• Added driver for smartcard reader Elatec TWN4 CCID (USB 0x09D8:0x0425).

• Updated cryptovision scInterface to version 7.3.1.
  The changes are:

  More...

  • Consolidated features of the last versions 7.2 and 7.1

  • Malta eID Release

  • Added Admin Card Gemalto V3

• Updated PC/SC-Lite smartcard resource manager to version 1.8.26.

HID

• Fixed: Switching touchpad to other driver via IGEL registry key.

CUPS Printing

• Added new version 25.1.0.425 of Printerlogic Printer Installer Client.

• Added new printer models into IGEL OS from the current CUPS drivers.

Base System

• Fixed bug in folder generation of the Application Launcher.

• Fixed TLS certificate verification problem of certificates signed by "USERTrust RSA CA" or "COMODO RSA CA". The problem could occur in clients like Citrix Workspace App and VMWare Horizon client.

• Fixed password change with AD/Kerberos. Before this fix, the password complexity rules were not enforced for users with the Reset Password permission for their account.

• You can now connect to Bluetooth devices without pairing. For this a new registry key is available.

  More...

  Parameter	connect devices without pairing
  Registry	devices.bluetooth.connect_only
  Value	enabled / disabled

• Some devices do not connect automatically after reboot. To fix that, bluetoothctl connect \<device-ID> can be executed via script. If the device is connected (0) or not (1) can be seen in return value.
  Known devices that do not connect:

  • dialog semiconductor IoT Multi Sensor DK

• SSHv1 support is now removed due to newer openssh libraries.

• Forcing protocol version 1 via SSH Session > Options is no longer possible.

• The network.ssh_server.server_key_bits registry key parameter is removed due to deprecation of SSHv1.

• Updates systemd to Ubuntu Focal version.

• Improved stability of mounting network shares when using a static network configuration.

• Fixed apparmor cache issue after update with OSC installer.

• Bug fix: touchscreen calibration on 1 or more normal screen with 1 touch screen environment.

• Fixed syslog, kern.log, auth.log, and daemon.log entries are not shown in IGEL System Log Viewer.

• Updated Grub2 to current Debian SID/Bullseye version 2.04.

• Removed deprecated registry keys system.idlecommand.

• New Bluetooth pairing tool and Bluetooth tray icon for Bionic.

• Updated kernel to mainline version 5.4.48.

• If used as master image, the image will expand itself to full size (limited to 16 GiB) on flash. This is done only on first boot and never again.

• Possible rollout of initial settings, certificates or licenses placed on first partition for this you need to:

  1. Write image to your USB/Flash medium.

  2. Mount or simply access the 1. VFAT partition which is present (should be empty).

  3. Copy your setup.ini and/or **.lic files to the 1st partition (no directories).

  4. Create a ca-certs directory and copy your certificates into it. They will be copied to the /wfs/ca-certs directory on first boot.

  5. You can now copy the USB/Flash medium several times if needed.

  6. On first boot, the device will reboot out of the splash screen (reread changed partition table)

  7. The settings, certificates and/or licenses will get rolled out and deleted from the 1st partition.

• Added initial support for Thunderbolt devices (only limited support here, may work but is not guaranteed).

• Updated IGEL EULA.

• Updated AMD Microcode to version 3.20191218.1.

• Updated Intel Microcode to version 20200520 and a special update for J1900 devices.

• Updated Intel Microcode to 20200616 version.

•  Added a userspace oom killer to the firmware.

Firmware Update

• An ongoing firmware update can now be canceled by the user when the network online status could not be reached after 10 seconds (since start of the firmware update).

H264

• Citrix hardware video acceleration supports the latest Intel hardware.

Storage Devices

• Fixed mount issues with Iphone XR/XE/11PRO.

• Mobile Device Access feature respects USB Access Control now. 

• Fixed unwanted ownership change of automounted Linux filesystem root directories.

 X11 System

• Fixed Display Switch not saving settings over reboot.Default to settings from Setup instead of mirror when no Display Switch profile is available.

• Prevent misconfiguration that picks GPU without render capability as primary (e.g. Displaylink).

• Improved Nvidia with additional GPU handling.

• Fixed error with single-gpu Nvidia card support.

X server

• Fixed a Xorg crash due to a NULL pointer dereference in the Intel driver.

Window Manager

• Fixed random login (greeter) window focus issues.

Shadowing/VNC

• Added the "snapfb" option for the VNC server.

  More...

  Registry	network.vncserver.snapfb
  Value	enabled / disabled
  Info	This option should only be enabled with experienced delays in remote or shadowing session.

• Improved security of the password authentication method - the VNC server does not require anymore a file holding the password. During client authentication, the server retrieves now the password from the IGEL Setup.

VNC Viewer

• Fixed occasional freeze of shadowing session e.g. when resizing a window. Now the session gets unlocked again after about 20 seconds.

  More...

  Parameter	Unlock X server in case of shadowing session freeze
  Registry	network.vncserver.grab_buster
  Type	bool
  Value	enabled / disabled

VirtualBox

• Fixed no automatic resolution changes as virtualbox guest issue.

Audio

• Fixed headset microphone using 3.5mm audio jack in Dell Wyse 3040.

• Added possibility to set some snd_hda_intel kernel module parameter to overcome possible issues with sound devices.
  New registry keys:

  More...

  Parameter	Enable Message Signaled Interrupt
  Registry	system.sound_driver.snd_hda_intel.enable_msi
  Type	bool
  Value	enabled / disabled

  Parameter	Force enable device
  Registry	system.sound_driver.snd_hda_intel.enable
  Type	bool
  Value	enabled / disabled

  Parameter	Position fix quirk
  Registry	system.sound_driver.snd_hda_intel.position_fix
  Range	[Default] [Auto (0)] [LPIB (1)] [POSBUF (2)] [VIACOMBO (3)] [COMBO (4)] [SKL+ (5)] [FIFO (6)]

  Parameter	Change sound card order
  Registry	system.sound_driver.snd_hda_intel.index
  Type	integer
  Value	empty

  Parameter	Detection of DMIC devices
  Registry	system.sound_driver.snd_hda_intel.dmic_detect
  Range	[Default] [Disabled] [Enabled]

  Parameter	Enable this if you encounter sound card problems
  Registry	system.sound_driver.snd_hda_intel.single_cmd
  Type	bool
  Value	enabled / disabled

  Parameter	Automatic power save timeout
  Registry	system.sound_driver.snd_hda_intel.power_save
  Type	integer
  Value	empty

  Parameter	Reset controller in power save mode
  Registry	system.sound_driver.snd_hda_intel.power_save_controller
  Type	bool
  Value	enabled / disabled

  Parameter	Choose sound model to use
  Registry	system.sound_driver.snd_hda_intel.model
  Type	string
  Value	Auto

  Parameter	If you encounter sound problems try to choose one of the alternative masks
  Registry	system.sound_driver.snd_hda_intel.probe_mask
  Range	[Auto] [1] [8]

• Old settings. Command at startup removed.

Jabra

• Avoid deploying of the same Jabra Xpress package several times on the same Jabra device.

Evidian

• Evidian now triggers the regular Horizon session script.

Hardware

• Fixed non-working Prolific PL2303 USB-to-serial adapters.

TC Setup (Java)

• Removed "default" button left of selection box IGEL Setup: Sessions > Citrix > Citrix Global > Window > Multimonitor full-screen mode.

Remote Management

• Fixed repeated firmware registering over the ICG which can occur after a new firmware was successfully registered in the UMS. The device invokes firmware registering again after every settings transfer from the device to the UMS. This behavior lasts until reboot.

• Fixed syncing settings changed on the device if the UMS wasn't reachable.

• Fixed handling of the structure tag if it was configured in the system dialog "UMS Registering".

IGEL Cloud Gateway

• Maximum waiting time for a response from the ICG server can now be configured by the parameter system.remotemanager.rmagent_timeout (default: 90 seconds).

VNC

• Shadowing notification is restricted to primary monitor and cannot be moved outside of the monitor's visible range.

• Fixed sporadic connection failure in VNC server.

• Fixed occasional freeze of shadowing session e.g. when resizing a window. Now the session gets unlocked again after about 20 seconds.

  More...

  Parameter	Unlock X server in case of shadowing session freeze
  Registry	network.vncserver.grab_buster
  Type	bool
  Value	enabled / disabled