Part List

  • Endpoint device
  • Foot stand
  • Power supply with integrated DC cable
  • AC power cord
  • Optional: connectivity bar
  • Optional: external WLAN antenna as a part of Intel® 9260 Wireless-AC WLAN and Bluetooth

CAUTION! Strictly follow the power connection note below:

  1. Connect all accessories, e.g. mouse, keyboard, screen (not part of the equipment), and Ethernet.
  2. Connect the AC power cord with the receptacle of the power supply.
  3. Connect the DC cable with the DC in receptacle on the rear side of the device.
  4. Connect the other end of the AC power cord with a suited mains socket.
  5. Switch on the device with the touch sensor on the front side.

Technical Specifications


Available operating systems

Optional: Microsoft Windows 10 IoT (W10)


IGEL Workspace Edition, registration required

AMD RX-216GD 1.6 GHz (Dual-Core) up to 3.0 GHz (boost mode),
system on a chip (SoC)

PCIe slot

1x Gen2 x2, for half-length / low-profile PCIe cards 
(with full-height bracket up to 111.6 mm)


Storage4 GB (LX) or 32 GB (W10), larger SSD modules on request


ChipsetAMD Radeon graphics
Video memory64 – 512 MB shared memory
Ports (supported resolutions)

Standard: 3x DisplayPort 1.2
(2x max. 3840 x 2160 @60Hz; 1x max. 2560 x 1600 @60Hz)

With optional graphics card: 4x DisplayPort 1.2
(2x max. 3840 x 2160 @60Hz; 2x max. 2560 x 1600 @60Hz)

Multistream support (daisy chain) depends on configuration
(official support is not provided).

Accelerated video decoding support for resolutions up to 1x 4K. (Note: if the optional external graphics card is used, resolution is available on its DisplayPort)

Supported video compression standard

H.265 (HEVC)


Ethernet10/100/1000 Base-T (RJ-45 connector)

integrated Intel® 9260 Wireless-AC (802.11ac WLAN and Bluetooth 5.0) or
external connectivity bar, 802.11 a/b/g/n


ChipsetRealtek High Definition Audio (ALC662)
Ports1x line-out (TRS), 1x mic-in, 1x DisplayPort (Intel HD Audio)

1x internal


USB 2.0

3x rear

USB 3.02x front
DisplayPort 1.23x rear
Smartcard readeroptional: 1x front
Ethernet1x rear

rear: 1x keyboard

12 V DC in1x rear
Line-out1x rear
Mic-in1x rear
Security lock1x rear
Serial1x rear

Dimensions and Weight

Device (DxWxH), upright

232 x 99 x 242 mm (with foot stand)
232 x 68 x 227 mm (without foot stand)

Device weight

1.60 kg (with foot stand and external power adapter)

Packaging (DxWxH), horizontal297 x 366 x 125 mm
Packaging weight0.56 kg

Environmental Conditions

Strictly follow safety instructions and respect environmental conditions!

Coolingfanless convection
Operating temperature

vertical (without VESA mount):
0 °C – 40 °C, 32 °F – 104 °F

vertical (with VESA mount):
0 °C – 35 °C, 32 °F – 95 °F

horizontal (with optional rubber feet only):
0 °C – 35 °C, 32 °F – 95 °F

horizontal (with optional rubber feet and additional graphics card):
0 °C – 30 °C, 32 °F – 86 °F

Operating humidity20 % – 80 %, non-condensing

Electrical Data

Power supplyexternal
Power supply AC inputauto sensing 100 – 240 V / 50 – 60 Hz
Power supply DC output

12 V / 3 A External Power Adapter
(A140-1120300N & FSP036-RHAN2)

Power consumption

5.7 W (idle) / 1.2 W (sleep) / < 0.8 W (off)
(@230 V, 50 Hz)

Typical Energy Consumption


23.09 kWh (per year, @230 V)
22.08 kWh (per year, @115 V)

ETEC, max33.0 kWh (per year, @230 / 115 V)

Options for Device Mounting

VESA mount

for mounting on the back of a monitor (VESA75, VESA100)
vertical mounting only!

Rubber feetfor horizontal placement of the device

Connectivity Bar

Option 11x parallel port and 1x anti-theft USB 2.0 port
Option 21x parallel port and 1x 802.11 a/b/g/n WLAN


Integrated smartcard readerfor secure smartcard-based authentication
VESA mountfor mounting on the back of a monitor
Rubber feet

for horizontal placement of the device 

for the use of the fourth monitor via 1x DisplayPort 1.2 (max. 2560x1600)

USB-to-serial adapterfor connecting peripherals that require a serial port
USB-to-parallel adapterfor connecting peripherals that require a parallel port
Connectivity bar

1) for secure USB connection and for connecting peripherals that require a parallel port, or

2) for WLAN option and for connecting peripherals that require a parallel port

Integrated WLAN / Bluetoothfor wireless connectivity

For UD7 devices H850C, IGEL recommends the following adapters:

–  for connecting a monitor that requires a DVI port:

At lower resolutions (up to 1920 x 1200 @60 Hz), a passive DisplayPort-to-DVI adapter can also be used.