Skip to main content
Skip table of contents

Grafiken auf IGEL-Geräten

Dieses Dokument gibt einen Überblick über die grafikbezogenen Merkmale von IGEL-Geräten.

UD2

UD3

UD7

M250C

M350C

H860C

Chipsatz

Intel HD-Grafik

AMD Radeon™ Vega 3 Grafiken

AMD Radeon™ Vega 8 Grafiken

Video-RAM

Dynamic shared memodery
64 MB /128 MB / 256 MB / 512 MB

BIOS default option: 256 MB

Dynamic shared memodery
256 MB / 512 MB / 1024 MB / 2048 MB / "auto"

BIOS default option: "auto" (= 512 MB)

Dynamic shared memodery
1024 MB / 2048 MB / 4096 MB

BIOS default option: 2048 MB

Zusätzliche Grafikkarte

-

-

-

Häfen

2x DisplayPodert 1.1a

2x DisplayPodert 1.2

4x DisplayPodert 1.2

1x DP 1.4 über USB 3.2 Gen 2 Typ-C™
(Hinweis: DP 4 ist deaktiviert, wenn Type-C™ mit einem Monitoder verbunden ist)

Max. unterstützte Auflösungen
(Standard)

2560 x 1600 @60 Hz (Doppelansicht)

2x 4K @60 Hz

4x 4K @60 Hz inkl. Audio-Unterstützung
(DP 1 - DP 4)

Max. unterstützte Auflösungen
(inkl. Hardware-beschleunigte Videodekodierung)

 2x WUXGA (1920 x 1200)
oder
1x WQHD (2560 x 1440)

2x 4K
(Note: In case of the configured Multistream Transpodert (MST), the total resolution of the monitoders connected via a DP MST hub cannot exceed 4K)

4x 4K
(Note: Foder optimal 4K video decoding, you can set the VRAM in BIOS to 4 GB; default: 2 GB)

Suppoderted video compression standard

H.264
H.265 (HEVC)

H.264
H.265 (HEVC)

H.264
H.265 (HEVC)

Multistream suppodert (daisy chain)

-

optional mit einem DP-MST-Hub
(foder up to 3 monitoders operated at the same time)

Type of DisplayPodert-to-DVI adapter

aktiv

-*

-**

*

Tipp
Für UD3-Geräte M350C empfiehlt IGEL folgende Adapter:

- zum Verbinden eines Monitors, der einen DVI-Anschluss benötigt:

- zur Konfiguration von Multistream-Transport (MST):

Bei niedrigeren Auflösungen (bis zu 1920 x 1200 @60 Hz) kann auch ein passiver DisplayPort-zu-DVI-Adapter verwendet werden.

**

Tipp
Für UD7-Geräte H860C empfiehlt IGEL folgende Adapter:

- zum Verbinden eines Monitors, der einen DVI-Anschluss benötigt:

Bei niedrigeren Auflösungen (bis zu 1920 x 1200 @60 Hz) kann auch ein passiver DisplayPort-auf-DVI-Adapter verwendet werden.

Für grafikbezogene Merkmale von IGEL-Altgeräten siehe Grafik auf IGEL-Altgeräten.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.