Hardware Hardware FAQs Current: Graphics on IGEL Devices PDF Download PDF Download page Graphics on IGEL Devices. Current page All pages Graphics on IGEL Devices This document provides an overview of the graphics-related characteristics of IGEL devices. UD2UD3UD7M250CM350CH860CChipsetIntel HD GraphicsAMD Radeon™ Vega 3 Graphics AMD Radeon™ Vega 8 GraphicsVideo RAMDynamic shared memory 64 MB /128 MB / 256 MB / 512 MBBIOS default option: 256 MBDynamic shared memory 256 MB / 512 MB / 1024 MB / 2048 MB / "auto"BIOS default option: "auto" (= 512 MB)Dynamic shared memory 1024 MB / 2048 MB / 4096 MBBIOS default option: 2048 MBAdditional graphics card---Ports2x DisplayPort 1.1a2x DisplayPort 1.24x DisplayPort 1.21x DP 1.4 via USB 3.2 Gen 2 Type-C™(Note: DP 4 is disabled when Type-C™ is connected to a monitor)Max. supported resolutions(standard)2560 x 1600 @60 Hz (dual view)2x 4K @60 Hz4x 4K @60 Hz incl. audio support (DP 1 – DP 4)Max. supported resolutions(incl. hardware-accelerated video decoding) 2x WUXGA (1920 x 1200)or 1x WQHD (2560 x 1440)2x 4K(Note: In case of the configured MST, the total resolution of the monitors connected via a DP MST hub cannot exceed 4K)4x 4K(Note: For optimal 4K video decoding, you can set the VRAM in BIOS to 4 GB; default: 2 GB)Supported video compression standardH.264H.265 (HEVC)H.264H.265 (HEVC)H.264H.265 (HEVC) Multistream support (daisy chain)-optional with a DP MST hub(for up to 3 monitors operated at the same time)Type of DisplayPort-to-DVI adapteractive-*-*** TipFor UD3 devices M350C, IGEL recommends the following adapters:– for connecting a monitor that requires a DVI port:Mini DisplayPort to 2 Port DVI-D MST Hub from LINDY in combination with the DisplayPort to Mini DisplayPort Adapter from LINDYDisplayPort to HDMI Active Adapter from Plugable (requires an additional HDMI-to-DVI adapter cable)– for configuring multistream transport (MST): DisplayPort 1.2a Splitter 2 Port from LINDYAt lower resolutions (up to 1920 x 1200 @60 Hz), a passive DisplayPort-to-DVI adapter can also be used. ** TipFor UD7 devices H860C, IGEL recommends the following adapters:– for connecting a monitor that requires a DVI port:Mini DisplayPort to 2 Port DVI-D MST Hub from LINDY in combination with the DisplayPort to Mini DisplayPort Adapter from LINDYDisplayPort to HDMI Active Adapter from Plugable (requires an additional HDMI-to-DVI adapter cable)At lower resolutions (up to 1920 x 1200 @60 Hz), a passive DisplayPort-to-DVI adapter can also be used. For graphics-related characteristics of legacy IGEL devices, see Graphics on Legacy IGEL Devices. ×