1. Switch on the virtual machine and launch the VMware Console in order to configure the settings.

    VMware Console


    These shortkeys can be used to perform the following actions:
    1: Configure network
    2: Set DHCP range
    P: Change password for the web interface
    Y: Apply settings
    Shift + T: Confirm change in the deployment type
  2. Press [ 1 ] to configure the virtual appliance.
  3. Give the IP address, netmask and gateway IP.

    Virtual appliance configuration

  4. Confirm your settings by pressing [ Y ].
  5. Press [ 2 ] to set up the DHCP range for the server.
  6. Enter the first IP address, last IP address and lease time.
  7. Confirm your settings by pressing [ Y ].
    The DHCP server is enabled and is ready to assign an IP address from the address range to target devices.