Download PDF
Download page Download.
Download
Menu path: Setup > System > Update > Snapshots > Download
Here you can download and install a snapshot.
Reset IGEL configuration settings
☑ After the reboot, the following data are reset or deleted:
- The configuration parameters are reset to their defaults.
- The UMS registration and the associated client-side certificate are deleted.
- The user's data on drive F are deleted, if Reset user partition is enabled.
- The firmware licenses are retained.
☐ All data are retained. (Default)
Reset user partition
☑ User partition is reset after snapshot download.
☐ User partition is not resetted. (Default)
Activate Windows after snapshot upload/download: (see Windows Activation)
☑ Windows will be activated automatically after the snapshot is downloaded. (Default)
☐ Windows will not be activated automatically.
Windows activation timeout (in seconds): Timeout in seconds for Windows activation attempts during the download. If all attempts have failed within the timeout period, no further attempt will be made. (Default: 60)
Protocol: Protocol with which the snapshot file is downloaded from a server or obtained from a local directory.
Possible values:
- File: The snapshot file will be obtained from a local storage device, e.g. from a USB storage device.
- SMB: The snapshot file will be downloaded from a Windows network drive.
- HTTP:The snapshot file will be downloaded from a WebDAV server (e.g. UMS).
- HTTPS: The snapshot file will be downloaded from a WebDAV server (e.g. UMS) with transport encryption.
- FTP: The snapshot file will be downloaded from a FTP server.
File name: File name of the snapshot file on the local storage device
Download Snapshot: Loads the snapshot onto the thin client and begins a reboot.
Additional fields for the SMB protocol
Server: Host name or IP address of the server to which the snapshot file will be uploaded
Path:Share name for the snapshot file on the server.
User name: User name for the server to which the snapshot file will be uploaded
DOMAIN\Username
.
Password: Password for the server to which the snapshot file will be uploaded
Additional fields for the HTTP and HTTPS protocols
Server: Host name or IP address of the server from which the snapshot file will be downloaded.
Path: Directory path for the snapshot file on the server. (Default: ums_filetransfer
)
Port: Port of the server from which the snapshot file will be downloaded (Default: 9080 for HTTP, 8443 for HTTPS)
Proxy: Host name or IP address of the proxy
Port: Port of the proxy (Default: 1080)
User name: User name for the server from which the snapshot file will be downloaded.
Password: Password for the server from which the snapshot file will be downloaded.
Additional fields for the FTP protocol
Server: Host name or IP address of the server from which the snapshot file will be downloaded.
Port: Port of the server from which the snapshot file will be downloaded. (Default: 21)
Path: Directory path for the snapshot file on the server.
Username: User name for the server from which the snapshot file will be downloaded.
Password: Password for the server from which the snapshot file will be downloaded.