Skip to main content
Skip table of contents

With StepOver TCP Client

On the Device

->Connect the signature pad to one of the device's USB ports.

->Go to User Interface > Input > Signature Pad in IGEL Setup.

->Enable StepOver TCP Client.

->Modify Listening TCP Port if needed. (Default: 8888)

You can check whether the StepOver TCP Client is running on the device by entering the following in a local terminal: ps waux | grep sotcp. The result should contain an sotcp process.

On the VDI Server (Windows)

->Locate the sodc.exe program on the server. It is the part of StepOver eSignature Office and can be found in [Your Program Files Directory]\StepOver\eSignatureOffice [version]\driver\.

->If you are using a non-standard  TCP port, change it in the config.ini file located in the same directory.

Stepover TCP Client Configuration

->Execute sodc.exe. The StepOver Pad Test window will open. Use its buttons to search and select your signature pad and try writing into the provided field.

stepover-sodc
Testing a StepOver Signature Pad

The status LED of the pad will turn to green when the connection is successful. The signature pad is now ready to be used with enabled applications such as StepOver eSignature Office.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.