Getting Started First Steps with IGEL Connecting Your IGEL Device Current: Connecting Your IGEL UD Device PDF Download PDF Download page Connecting Your IGEL UD Device. Current page All pages Connecting Your IGEL UD Device You have opened your IGEL package, see Unpacking Your IGEL Universal Desktop Package, and want to connect your device.Attach the foot stand to the device, using the screw/s found on the bottom of the foot stand. There are three different types of foot stands. Depending on the device type, you need one screw or two screws. See the following pictures. Two screws: One screw: One hand screw: Connect the plugs as shown in the picture below. (Example with a UD3) Depending on the device, the plugs may be arranged differently, see e.g. UD2 M250C, UD2 D220, UD3 M350C, UD3 M340C, UD6 H830C, UD7 H860C, UD7 H850C. Next StepSetting Up the Device Initially ×